How much chlorine should I put in my pool?

Keeping a pool clean and germ-free is no easy job. To battle the impurities and bacteria in the water you’ll have to depend upon the good old chlorine that has been doing this job for us for many years.

However, to take the maximum effect you’ll have to learn how and how much chlorine to add in the pool. Maintaining the pH and chlorine level in the pool is necessary to effectively get rid of bacteria and getting satisfactory results.

Now you might be wondering, how much chlorine should I put in the pool? Adding too much can make the water abrasive while subjecting too little might leave you with contaminated water. That is why you better know the right amount to add. This article will guide you through the factors that need to be taken into account to add the right amount of chlorine in your pool.

Factors to consider:

Your pool size

The size of your pool determines the amount of water it is holding and this information is vital while adding chlorine. It helps you figure the amount of chlorine to be added in that much water. The standard for adding chlorine is 0.00013 ounces chlorine for every gallon of water.

Keeping it in mind, you’ll have to sort out how much gallons can your pool store and then add chlorine accordingly. For instance, if your pool has a capacity of 30,000 gallons then you’ll have to add 30,000 multiplied by 0.00013ounces of chlorine. However, the pool size is not the only factor to consider.

pH level

pH level is the measure of the acidity of water. A pH below 7 is considered acidic while above 7 we have alkaline water. You’ll have to measure the pH level of your pool water beforehand. At a very high pH level, even adding a sufficient amount of chlorine won’t make water safe. To set the pH level at a neutral reading of 7, you can subject some muriatic acid in the pool. Once the pH level varies from 7.2 to 7.6, it’s finally time to add the chlorine.

Chlorine level

You also have to check how much dose of chlorine already rests in your pool water. A testing strip can help you with this task. The right chlorine levels for pool water are set at 1 ppm to ppm.

A higher chlorine level than this standard measurement will leave the swimmers with red eyes and frequent itching. At such levels, you could also smell the strong pungent odor of chlorine indicating more than the required amount of chlorine.

The above-stated three factors are the most vital to consider to add the right amount of chlorine in your pool. Lastly, you should know how to lower the chlorine level in your pool in case you add too much. Remove any pool cover you have and expose the water in your pool to sunlight. Doing so reduces the excess of chlorine in the water. Hopefully, this article has helped you with what you were looking for. Swim safe.

Leave a Comment